Warnings And Cautions; Introduction; Features - Leviton LEO Mode D'emploi

WARNINGS AND CAUTIONS

• TO AVOID SHOCK OR DEATH, always connect this product to a grounded circuit.
• DO NOT operate this product if there is visible damage to the unit or cable connections.
• DO NOT operate near flammable materials - minimum 8" (20 cm) from adjacent surface.
• DO NOT expose to moisture. This product is for indoor use ONLY!
Allow product to fully acclimate to surrounding environment before connecting to a power source.
DO NOT open the housing or attempt any repairs. Opening the housing or attempting to repair the product will void the
warranty. Contact Leviton Technical Assistance.
• Mount fixture in a safe position with adequate ventilation and away from a heat source - minimum 20" (50 cm) from
adjacent surface. Maximum ambient temperature is 95 °F (35 °C).
• DO NOT cover the ventilation holes when operating to avoid internal overheating.
• Avoid direct eye exposure to the light source while the product is ON.
• When the Follow Spot is mounted to a tripod, the base width of the tripod must be a minimum of 32" (81 cm) in diameter
and the mounting height of the Follow Spot yoke must not exceed 44" (112 cm).
• If you are unsure about any part of these instructions, consult an electrician.

INTRODUCTION

LEO™ LED Follow Spot is a high-performance LED lighting fixture that delivers a bright and long beam in a choice of color
temperatures (3200K and 5600K) with high color rendering index (CRI 90 + ).
Detachable Iris Diaphragm
Rear
Dual Cooling Fan
Handle
Power
Strobe
Lead
Button
Dimmer
with Indicator
Optional Mounting
Hole for Yoke
Yoke
Fastening
Lever

FEATURES

• Zoom Lens - 8° to 15°
• 5-Color Changer
• Fully Dimmable - 0% to 100%
• Iris Diaphragm
• B Size Metal Gobo Holder (W 3-3/4", Open Dia. 2-3/4")
• Strobe Light
• 5m Power Lead with powerCON and PBG (NEMA 5-15P Connector)
• Quiet Operation
Detachable Gobo Holder
Cover Latch
Lens Tube Cover
Focusing
Side Handle
Knobs
Yoke
1
Cover Latch
5-Color Changer