Control Panel; Programme Knob And On/Off Indicator Light - ZANKER ZKI1410 Notice D'utilisation

• A qualified and competent person must do the elec-
trical installation.
• A qualified and competent person must do the
plumbing installation.
• Do not change the specifications or modify this prod-
uct. Risk of injury and damage to the appliance.
• Do not use the appliance:
– if the mains cable or water hoses are damaged,

Control panel

1 Programme knob
2 Start/cancel button / (RESET)
3 Indicator lights
4 On/off indicator light

Programme knob and On/Off indicator light

• To set a washing programme, turn the programme
knob clockwise or anticlockwise. One of the washing
programmes on the programme knob must agree
with the on/off indicator light on the control panel.
18
– if the control panel, worktop or plinth area are
damaged, that you can get access to the inner
side of the appliance.
Contact your local Service Force Centre.
• Do not drill into the sides of the appliance to prevent
damage to hydraulic and electrical components.
Warning! Carefully obey the instructions for
electrical and water connections.
Indicator lights
The indicator light comes on when the washing phase
or the rinsing phase operates.
The indicator light comes on when the drying phase
operates.
The indicator light comes on when the washing pro-
gramme is completed. Auxiliary functions:
• Level of the water softener.
• An alarm if the appliance has a malfunction.
– The on/off indicator light comes on (position ON).
• To set the appliance to the off position, turn the pro-
gramme knob until the programme marker agrees
with the on/off indicator light.
– The on/off indicator light goes off (position OFF).
4 3
1 2