Control Panel - ZANKER ZKI1530 Notice D'utilisation

• A qualified and competent person must do the elec-
trical installation.
• A qualified and competent person must do the
plumbing installation.
• Do not change the specifications or modify this prod-
uct. Risk of injury and damage to the appliance.
• Do not use the appliance:
– if the mains cable or water hoses are damaged,

Control panel

Programme knob
1
Start/cancel button / (RESET)
2
Delay start button
3
Indicator lights
4
On/off indicator light
5
1)
1) When the salt container is empty, the related indicator light does not come on while a washing programme operates.
– if the control panel, worktop or plinth area are
damaged, that you can get access to the inner
side of the appliance.
Contact your local Service Force Centre.
• Do not drill into the sides of the appliance to prevent
damage to hydraulic and electrical components.
Warning! Carefully obey the instructions for
electrical and water connections.
Indicator lights
Comes on when the washing phase or the rinsing
phase operates.
Comes on when the drying phase operates.
Comes on when the washing programme is completed.
Auxiliary functions:
• Level of the water softener.
• An alarm if the appliance has a malfunction.
Comes on when it is necessary to fill the salt container.
Refer to 'Use of dishwasher salt'.
After you fill the container, the salt indicator light can
continue to stay on for some hours. This does not have
an unwanted effect on the operation of the appliance.
5 4
1 2 3
19