Adjustment Of The Height Of The Upper Basket - ZANKER ZKI1410 Notice D'utilisation

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

– Make sure that glasses do not touch other
glasses.
– Put small objects in the cutlery basket.
• Plastic items and pans with non-stick coatings can
keep water droplets. Plastic items do not dry as well
as porcelain and steel items.
• Put light items in the upper basket. Make sure that
the items do not move.
Caution! Make sure that the spray arms can
move freely before you start a washing
programme.
Warning! Always close the door after you load
or unload the appliance. An open door can be
dangerous.
1
Arrange service dishes
and large lids around the
edge of the lower basket.
1
Use the cutlery grid. If the dimensions of the cut-
lery prevent use of the cutlery grid, remove it.
2
2
1
Arrange the items to let
water touch all surfaces.
Prevent to put plates in the first three sections in
the front part of the upper basket. Make sure the
plates tilt forward.

Adjustment of the height of the upper basket

If you put large plates in the lower basket, first move
the upper basket to a upper position.
Warning! Adjust the height before you load the
upper basket.
Maximum height of the dishes in :
upper basket
Upper position
Lower position
1
Do these steps to move the upper basket to the upper
or lower position:
1. Move the front runner stops (A) out.
2. Pull the basket out.
3. Put the basket in the upper or lower position.
4. Replace the front runner stops (A) in their initial
position.
2
For longer items fold the
cup racks up.
lower basket
20 cm
31 cm
24 cm
27 cm
2
23

Publicité

Table des Matières
loading

Table des Matières