Fastening The Unit To The Factory Radio Mounting Bracket - Pioneer AVH-P6400CD Manuel D'installation

Fastening the unit to the factory radio mounting bracket. (Fig. 14) (Fig. 15)
Select a position where the screw holes of the bracket and the screw holes of this product become
aligned (are fitted), and tighten the screws at 2 places on each side. Use any of binding screws (4 ×
3 mm), binding screws (5 × 6 mm) or flush surface screws (5 × 6 mm), depending on the shape of
the screw holes in the bracket.
*1 Use binding screws (4 × 3 mm) only.
Factory radio mounting bracket
* 1
* 1
Screw
Dashboard or Console
Fig. 14
Fig. 15
12