Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
EN-823122
February 17, 2004
tightening (CW) flats on motor housing 382509 posi-
tion R.A. head in desired location and tighten (CW)
flats on motor housing securely
Remove 1/8" NPT pipe plug (installed temporarily)
from the motor backhead. Install right angle fitting
382664 pointing forward when tight. Install side hose
assembly 382674 (long) or 382673 (short).
Safety, Operation & Service
Quackenbush
Operating and Safety Instructions
Page 18
Publicité
Table des Matières
