Daikin BRC1E71 Manuel D'installation page 9

NOTE
● To prevent electrical noise and possible communication errors, avoid installing the
remote controller cabling parallel to or in the vicinity of line voltage circuits.
3-6 Installation procedure for the lower case.
When wiring the remote controller through the top center or rear access points, attachment of the
cable to the lower case is required before it is wall mounted. Closely follow the wiring
procedures.
3-6-1 Wall installatoin
Secure by using attached wood screws (2 pcs.).
Wood screws
( 3.5×16mm)
3-6-2 Switch box installation
Secure by using attached small screws (2 pcs.).
Switch box
(field supply)
(Use optional accessory
KJB211A)
8
Small screws (M4×16mm)
Switch box for two units
(with no cover)
1-13/16
(Installation pitch)
English