Organon TOF-Watch SX Manuel D'utilisation page 19

µC
µC (used when: changing the stimulation strength, DBS, TET, LA and if no
acceleration transducer is detected) (17).
mA
mA (used when: changing the stimulation current, DBS, TET, LA and if no
acceleration transducer is detected) (18).
°C
°C (used when: indicating temperature) (27).
Flashing: Temperature dropped < 32 °C, sensor has become disconnected.
%
Percent (used for TOF, 1 Hz and 0.1 Hz) (20).
TOF:
1 Hz, 0.1 Hz:
Second / shift mode (same symbol as on the button) (5).
Device calibrated (same symbol as on the button) (6).
Flashing symbol means that the instrument has not been calibrated after
switching on.
Device on / stopped (same symbol as on the button) (7).
Internal Error (9).
Battery empty (8).
Battery low (8).
com (flashing): Indicates interface communication problem.
19 | TOF-Watch SX Operator manual 33.512/A
Ratio between first and fourth response.
Twitch height compared with reference value, flashing
symbol means that the instrument has not been
calibrated after switching on.
TOF Watch has stopped transmission of data via interface.