Cleaning the dust container
•
Open the dust container (B) (see "Cleaning the motor fi lter").
•
Remove the cyclone separator from the dust container (B).
•
Turn the upper part anti-clockwise and pull it up.
•
Clean the parts with a dry cloth.
General cleaning advice
•
To clean, wipe with a soft, slightly moist cloth.
•
Dry the product after cleaning.
•
Never use corrosive detergents, wire brushes, abrasive scourers, metal or sharp
utensils to clean the product.
Maintenance
•
Store in a cool and dry place away from children and pets, ideally in
original packaging.
•
Avoid any vibrations and shocks.
Troubleshooting
Problem
The appliance does not start
Weak suction power
Motor is abnormally noisy
12
B
Solution
•
Connect the power plug properly.
•
Check if the electrical outlet is powered.
•
Check if the on/off button is set on.
•
Check if the fl exible hose or any of the
accessories are obstructed.
•
Hose not connected correctly
•
Remove and clean the fi lters.
•
Stop using the product immediately.
•
Check if the hose, tube or any of the
accessories are obstructed. Remove the
obstruction.
•
If the noise continues, power off the product
and disconnect the power plug.
•
Contact our customer service.