Profroid SOLO25 Notice D'instructions page 27

Electric heater connection schemes and electric power
Important
Application of adequate thermal control systems on feeder lines is mandatory.
Performance of all electric heaters must be periodically controlled to avoid damage due to ice build-up.
the manufacturer is not liable in any way for defects caused by non detected malfunctions.
SOLO 31 - Model with ø 315 mm fan motor
400V/3/50 Hz CONNECTION
(factory supply)
SOLO 35 - Model with ø 350 mm fan motor
400V/3/50 Hz CONNECTION
(factory supply)
RBA (1-2) High power electric heater in coil.
RBB (1-2-3) Low power electric heaters in coil.
RSA1 High power electric heater on inner drip tray.
230V/1/50 Hz CONNECTION
(to set)
RBA (1-2) High power electric heaters in coil.
RBB1
RSA1
SOLO 31-E / SOLO 31-B
Total power (W)
230V/3/50 Hz CONNECTION
(to set)
SOLO 35-E / SOLO 35-B
Total power (W)
Low power electric heaters in coil.
High power electric heater on inner drip tray.
154 254
156 256
158 258
1750 3150
230V/1/50 Hz CONNECTION
164 264
166 266
168 268
2250 4050
354 454
356 456
358 458
4900 6300
6 RR standard
(to set)
364 464 564
366 466 566
368 468 568
6300 8100 9900
23
www.profroid.com