Hazards / Risks; Reference Standards; Instructions For A Correct Installation; Manufacturing And Dimensional Features - Profroid SOLO25 Notice D'instructions

Hazards / Risks

1. Electric shock. The model is equipped with fan motors
and electric defrost heaters. It is important to use elec-
trical safety systems that are in compliance to the re-
gulations in force.
2. Burns. The surface of the electric defrost heaters can
reach the temperature of 350 °C
.
3. Cuts. The heat exchanger is made with fins with sharp
edges and the casing is made of sheet metal parts.
4. Parts in motion. The model is equipped with fan motors
fitted with external protection.
5. Crushing. The weight of unit may exceed 100 kg.

Reference standards

- MACHINES DIRECTIVE 2006/42/EC
- LOW-VOLTAGE DIRECTIVE 2014/35/UE
- ELECTROMAGNETIC COMPATIBILITY DIR. 2014/30/UE
- PED DIRECTIVE 2014/68/UE
- ERP DIRECTIVE 2009/125/EC

Manufacturing and dimensional features

SOLO 25 - Model with ø 250 mm fan motor
135 B
A
P1
Fastening
detail
SOLO 25
Fan motors n° x Ø mm
Dimensions A
B
Coil connections In tube
(mm)
HFC Out tube
(mm)
Coil connections
In tube
(inch)
CO Out tube
(inch)
2
Coil connections
In tube (GAS)
Glycol
Out tube (GAS)
Drain connection Ø
(GAS)
Net weight HFC kg
Net weight CO kg
2
Net weight Glycol kg
Use thermostatic valve with external pressure equalizer (HFC)
P1
135
100
400 min.
30
= =
10
144 146 148 244
1x250 1x250 1x250 2x250
774 774 774 1224
480 480 480 930
12 12 12 12
12 12 12 22
1/2" 1/2" 1/2" 1/2"
1/2" 1/2" 1/2" 1/2"
- 1/2"G - -
- 1/2"G - -
1" 1" 1" 1"
15 14 14 24
16 15 15 26
- 15 - -

Instructions for a correct installation

Minimum distance from wall on heater side
During the installation phase observe the minimum dimension
A+250 as to allow an adequate space for the removal and fitting of
heaters.
Minimum distance from wall on suction side
During the installation phase observe the minimum distance of
400 mm as to allow proper functioning of motor.
407 P1
336
509
246 248 344 346
2x250 2x250 3x250 3x250
1224 1224 1674 1674
930 930 1380 1380
12 12 12 12
22 22 22 22
1/2" 1/2" 1/2" 1/2"
1/2" 1/2" 1/2" 1/2"
1/2"G - - 1/2"G
1/2"G - - 1/2"G
1" 1" 1" 1"
23 23 33 31
25 25 36 34
24 - - 33
Positioning of electric heaters
RBA - High power electric hea-
ter in coil.
RBB - Low power electric hea-
ter in coil.
RSA - Electric heater on inner
drip tray.
348 444 446
3x250 4x250 4x250 4x250
1674 2124 2124
1380 1830 1830
12 16 16
22 28 28
1/2" 1/2" 1/2"
1/2" 1/2" 1/2"
- - 3/4"G
- - 3/4"G
1" 1" 1"
31 42 39
34 46 43
- - 41
www.profroid.com
448
2124
1830
16
28
1/2"
1/2"
-
-
1"
39
43
-
19