Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
DISCHARGING THE CAPACITOR:
•
Use a screwdriver with insulated handle to touch the 2 connectors on the capacitor (13). The appearance
of an electric arc shows that the capacitor has discharged. Fig.16
SPARE PARTS:
IMPORTANT: Use of spare parts other than certified original parts is prohibited.
•
This machine requires no particular maintenance because the bearings are lubricated for life.
•
If any intervention is necessary to replace parts subject to wear, such as the grater, the basket, electrical or
other components, please refer to the parts list. For all spare part orders (see references in the exploded
view at the end of the manual), state the type, the appliance serial number and the electrical specifications
recorded under the appliance.
SERVICING:
•
Neither a hose nor a pressure hose should be used for cleaning
•
After use, clean the basket assembly, bowl, cover, pulp container, plunger in clean water or with a dish
washing detergent product designed for this purpose. Then rinse and dry. Do not use abrasive products or
pads to clean the basket assembly.
•
The base is to be cleaned with a soft damp sponge, then dried.
•
If necessary, clean the shaft nut (23), the rockers (22) and the drive head assembly (21) with water using
the brush supplied. Fig.11
TAKE CARE:
•
For easier cleaning, do not leave food remains to dry on the bowl (4), the basket assembly (5), the cover
(2), or the fruit plunger (3).
•
It is recommended that all these parts of the machine are cleaned immediately after the work is finished.
COVER AND BOWL PRESENCE SAFETY DEVICE:
•
For the juice extractor to be able to start, the cover (2) and the bowl (4) must be centered in position on the
bowl centering device (7) and held by the clamping handle (1).
•
Putting the clamping handle in the vertical position (up) without the bowl or without the cover means that
the machine cannot be started.
MOTOR OVERLOAD SAFETY FEATURE:
•
Should the motor become blocked (foreign body, object that is too hard, too much pressure with the fruit
plunger on the products being processed), the motor overheating safety feature triggers and switches off
the motor (see overheating safety feature).
MOTOR OVERHEATING SAFETY FEATURE:
•
In the event of the motor overheating, the appliance stops automatically.
•
The safety feature has an automatic reset, so wait for the motor to cool (15 to 30 minutes), before restarting
the machine.
•
If the problem persists, switch off the power supply to the machine (unplug the cord from the mains socket
(10)) and call in the maintenance service or contact a Omcan approved dealer.
Maintenance
9
Publicité
Table des Matières
