Changing The Bluetooth Settings - JVC KD-R711 Manuel D'instructions

Using the remote controller
2 R / F 3 : Reverse skips/
2 R / F 3
[Hold]
Selecting the playback modes
• For Bluetooth devices that support AVRCP 1.3.
1
[Hold]
2
] "REPEAT" j "RANDOM"
3
REPEAT
TRACK
ALL
GROUP
RANDOM
ALL
GROUP
To cancel repeat play or random play, select
"RPT OFF" or "RND OFF."
• To return to the previous menu, press
T/P BACK.
Changing the display information
Current track number with the elapsed
playing time = Current track number with
the clock time = Album name/performer
= Track title = (back to the beginning)
18 ENGLISH
Forward skips
: Fast-forwards or
reverses the track
: Repeats current track
: Repeats all tracks
: Repeats all track of current
group
: Randomly plays all tracks
: Randomly plays all track of
current group
Warning messages
ERROR CNNCT : The device is registered but
the connection has failed. Use <CONNECT
PH/CONNECT AU> to connect the device
again.
ERROR : Try the operation again. If <ERROR>
appears again, check if the device supports
the function you have tried.
PLEASE WAIT : The unit is preparing to use
the Bluetooth function. If the message does
not disappear, turn off and turn on the unit,
then connect the device again (or reset the
unit).
HW ERROR : Reset the unit and try the
operation again. If "HW ERROR" appears
again, consult your nearest JVC car audio
dealers.
Bluetooth Information:
If you wish to receive more information about
Bluetooth, visit the following JVC web site:
<http://www.jvc.co.jp/english/car/> (English
website only).
Changing the Bluetooth
settings
1
[Hold]
2
] <BLUETOOTH> ] <SETTINGS>
3
] Select a setting item, then repeat
the procedure to change the setting
accordingly.
• To return to the previous menu, press
T/P BACK.
• To exit from the menu, press DISP or MENU.