Using A Bluetooth Audio Player - JVC KD-R711 Manuel D'instructions

When <AUTO ANSWER> is activated....
The unit answers the incoming calls
automatically, 19.
• Press or the control dial to answer the
incoming call when <AUTO ANSWER> is
deactivated.
• Press 5/∞ to adjust the microphone volume
(01 – 03) during a phone call conversation.
To preset the microphone volume,
• Press 4 / ¢
Noise Reduction and Echo Cancelation mode.
( 19)
To end the call an incoming call, press and
hold or the control dial.
Switching conversation media (the unit/
mobile phone)
Press the control dial during a phone call
conversation, then continue your conversation
using the other media.
• Operations may be different according to the
connected Bluetooth device.
Switching the connected mobile phone
You can switch the current connected mobile
phone to the last connected mobile phone.
[Hold]
and "CONNECTING" flashes on the display.
When the last connected phone is being
reconnected again, "CONNECTED" and "[Device
Name]" appear alternately on the display. Now
you can use the last connected mobile phone
with the unit.
Arriving of a text message
When a text message comes in, the unit rings
if your mobile phone is compatible with text
message and <MSG NOTICE> is set to <ON>
( 19).
• You cannot read, edit, or send a message
through the unit.
19.
to turn on/off the
Using the remote controller
5 U / D ∞ /
2 R / F 3 /
SOURCE
5 U / D ∞ /
2 R / F 3 /
SOURCE
[Hold]
: Switches the conversation media
(between the unit and mobile
phone) during a phone call
conversation
Using a Bluetooth audio
player
Operations and display indications differ
depending on their availability on the
connected device.
] Select "BT FRONT" or
"BT REAR."
• If playback does not start automatically,
operate the Bluetooth audio player to start
playback.
[Hold]
: Answers calls
: Rejects calls
Starts or resumes
playback
Mutes the sound
Selects group/folder
Forward skips or
reverse skips
Fast-forwards or
reverses the track
ENGLISH 17