Chauvin Arnoux C.A 5233 Notice De Fonctionnement page 47

English
E ach pres s of
this length...
short
3.2.2 The
This key is used to choose a measurement range manually.
The range defines the maximum measurement span of which
the device is capable.
Remark: the Auto-range mode is activated as default.
Each press of
this length...
short
Long
(> 2 sec)
Remark 1: the continuity test
are not Auto-range.
Remark 2: the Capacitance Measurement mode
range only.
3.2.3 The
This key is used to store and display, successively, the current,
maximum, and minimum TRMS values.
The ,
MAX/MIN mode.
The AUTO mode is deactivated.
47 - 139
Change the nature of the measurement
AC or DC.
Select the continuity test
test
To display the temperature in degrees
Celsius (°C) or in degrees Fahrenheit (°F).
key
To change the measurement range
manually (span and resolution).
To return to Auto-range mode.
key
, , and
...serves to
mode.
...serves to
and diode test
, keys are inactive in the
or diode
modes
is Auto-