Télécharger Imprimer la page

Taurus Artica Mode D'emploi page 16

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 19
Filling with water:
- It is essential to have filled the
deposit with water to be able to work
with steam.
- Open the lid of the filling mouth.
- Fill the deposit taking care to obser-
ve the MAX level (Fig. 1)
Close the lid of the filling mouth.
Use:
- Unroll the cable completely before
plugging it in.
- Connect the appliance to the mains.
- Turn the thermostat control to the
desired temperature position.
- Do not use temperatures higher than
those indicated on the garments to
be treated.
• Temperature for synthetic fibres
(Polyester, Nylon...).
• • Temperature for silk, wool.
• • • Temperature for cotton. (Mini-
mum temperature for steam ironing)
Max Temperature for linen.
- If garment has various kinds of
fibres, select the temperature for
the fibre that requires the lowest
temperature. (For example, select
the temperature for polyester for an
article made out of 60% polyester
and 40% cotton).
- Wait until the pilot light (I) has
gone out which will indicate that the
appliance has reached an adequate
temperature.
- During use the pilot light (I) will
automatically flash on and off, thus
indicating that the heating elements
are operating in order to maintain
the desired temperature.
Dry ironing:
- The appliance has a steam flow
regulator that permits dry ironing
(without steam) when placed in the
0 position.
Steam Ironing:
- It is possible to iron with steam
whenever the deposit is filled with
water and the adequate temperature
is selected.
Steam flow control:
- The appliance has a (C) control
knob that allows to get the control of
the steam flow.
Spray:
- The spray can be used in both
steam and dry ironing.
- Press the spray button (A) to use
this operation.
- The spray button has to be pressed
repeatedly to release the first spray.
Steam blast:
- This function proportions extra
steam for eliminating wrinkles.
- Press the steam blast button (B).
Wait a few seconds until vapour
penetrates the fibres of the garment
before pushing the button again. For
optimum steam quality, do not apply
more than three successive blasts.
- The spray button has to be pressed
repeatedly to release the first spray.
Vertical steaming
It is possible to iron hanging curtains,
items of clothing on his hanger, etc.
To do so, follow the instructions:
- Select the maximum temperature of

Publicité

loading