gala gar Smart 400 TIG Pulse Manuel Technique D'instructions page 22

3. START-UP. ADJUSTMENT AND OPERATION CONTROLS.
3.1 OPERATION CONTROLS.
Una vez realizada la instalación eléctrica de alimentación puede proceder a la puesta en marcha del equipo. En
este apartado se describe el sistema de mando y regulación de los equipos Smart 400 TIG Pulse.
PANEL FRONTAL
No. Part name
1 Protective bar for front panel
2 Sticker on front panel
3 Socket for the torch switch
4 Aviation socket
5 "+" output terminal
6 Rotary knob
7 Gas outlet
8 "-" output terminal
No. Part name
1 Cable
2 Fuse holder
3 Gas inlet
4 Rubber foot
5 Shutter on the back panel
6 Back panel plastic enclosure
7 Power switch
Smart 400 TIG Pulse
FTONTAL PANEL
To protect and fix the front panel and cover.
To indicate the functions on the operation panel with the silkscreen.
To connect the torch switch.
To connect the remote control.
To connect the earth clamp.
To adjust parameters
To connect the gas connector of the TIG torch.
To connect the TIG torch.
BACK PANEL
For power supply input.
The fuse holder for control circuit (for installing a 5A fuse).
To input the shield gas.
To support the machine.
As the entrance to air duct, to protect the cooling fan.
To control the ON/OFF of the input power of the machine.
PANEL TRASERO
Function
Function
22