Before The First Use - Domo DO9244MC Mode D'emploi

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 7
I CLEANING AND MAINTENANCE
·
To protect against electrical shock or burns, do not immerse unit, cord, or plug in water or other liquid.
·
Failure to maintain this appliance in a clean condition could adversely affect the life of the appliance
and possibly result in a hazardous situation.
I PRODUCT-SPECIFIC WARNINGS
·
Do not use the appliance if there is any water in it or the parts are still wet after cleaning.
·
Do not use the appliance without ingredients.
·
Handle with great care when using sharp accessories like knives. Only touch the accessories when they
stopped moving inside the appliance.
·
Make sure that the cover is properly locked before using the appliance.
·
Always wait for the blade to come to a complete standstill before removing the cover.
·
Do not use this appliance to mix sticky foods or substances.
PARTS
1.
Start button
2.
Motor unit
3.
Top lid
4.
Blade
5.
Mixing bowl
6.
Shaft
7.
Anti-slip base

BEFORE THE FIRST USE

·
Before use, remove all packaging materials and any promotional stickers.
·
Before first use, clean the various parts of the appliance.
·
Be careful: the blade is very sharp.
USE
1.
Place the blade on the shaft in the centre of the mixing bowl.
2.
Put the ingredients in the mixing bowl and close the lid.
3.
Place the motor unit onto the assembly by turning it slightly.
4.
Plug in the appliance and press the start button, at the same time holding the appliance by the
motor unit.
5.
At the end of preparation, release the button, unplug the appliance and wait until the blade come to
a complete stop.
6.
Remove the motor unit, the lid and the blade to pour out the preparation.
www.domo-elektro.be
SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE
1
2
3
4
5
6
7
17
DO9244MC

Publicité

Table des Matières
loading

Table des Matières