Before The First Use - Domo DO9203BL Mode D'emploi

PARTS
1. Measuring cup
2. Lid
3. Jar
4. Sealing ring
5. Blade assembly
6. Motor unit
7. Speed knob with pulse function

BEFORE THE FIRST USE

· Take the appliance out of the packaging
· Disassemble the different parts of the appliance and clean all removable parts according to the
instructions described in the section 'Cleaning and maintenance'.
· Reassemble all parts when they are dry:
1. Position the seal on the blade assembly. Hold the jar upside down. Screw the blades clockwise onto
the jar. Turn over the jar so that the
base is at the bottom again.
2. Tighten the lid onto the jar by turning
it clockwise until it clicks.
3. Place the measuring cup into the top
of the lid.
4. Turn the pitcher clockwise on the
motor block until you hear a click. The
blender is now ready for use.
USE
1. Make sure that the speed regulation button is at "0".
2. Put the plug in the outlet and position the container on the engine block.
3. Fill the container with the desired ingredients. Make sure that you do not exceed the maximum
amount of 1.5 l.
4. Position the lid with measuring cup on the container. Make sure that the lid has been fastened
properly. The appliance has a built-in safety feature and will not operate if the lid is not mounted
properly. Turn the speed regulator to the desired speed:
Position 1: for light liquids
Position 2: for thicker fluids and solid foods
5. For quick and accurate blending, turn the speed knob to the pulse function (to the left of 0) and hold
for a few seconds. When you release the knob, it will automatically reset itself to the 0 position. You
can do this a few times in a row, until the desired
www.domo-elektro.be
1
2
3
4
5
6
7
consistency has been reached.
17
DO9203BL