ENGLISH
18
1
Attach the extension strap to the Velcro strip on
one end of the lower back strip.
2
Then wrap the extended lower back strip
around your body.
3
Fasten the lower back strap with the Velcro strip
at a width that feels comfortable.
Positioning the upper back strap
1
To put the BlueTouch Pain Relief Patch in the
upper back strap, follow the same procedure
as described in steps 1 and 2 in section
'Positioning the lower back strap' above.
2
Remove clothing from the area to be treated.
Note: Make sure the skin in the area to be treated is
clean, entirely dry and free from creams, lotions and
other cosmetics.
3
Put on the upper back strap like a backpack.
First, put one arm through the shoulder sling
on one side. Then do the same on the other side.
Note: Make sure the BlueTouch Pain Relief Patch in the
strap is located on the area to be treated and the LED
area is in contact with the skin.