Overheating Protection; Environmentally-Friendly Disposal; Customer Service; Conditions Of Warranty - Cloer 6070 Manuel D'instructions

Overheating protection

The egg boiler has an overheating protection,
which protects the device from damage
with faulty operations. With an inadvertent
operation without water, the control lamp
goes out after a short time and the overheating
protection switches the device off. In this case,
pull out the power plug and leave the device
to cool for a few minutes, before you operate it
again (Caution! Do not pour any water onto the
boiling container).
Thermal cutoff
The egg boiler additionally has a thermal
cutout in addition to the automatic overheating
protection. If the overheating protection fails
with inappropriate operation, the thermal
cutoff separates the device from the current
supply. In this case, your egg boiler must be
brought to a Cloer specialist dealer or to the
Cloer customer service, as a renewed start-up is
no longer possible.
Environmentally friendly disposal
We use only environmentally friendly packaging
for the transport of our appliances. Please
recycle cardboard/paper and plastic packaging
appropriately.
CAUTION!
Electrical appliances should
not be disposed of with
the household trash.
Electrical appliances contain valuable raw
materials. When an appliance is worn-out,
please take it to a recognised recycling
facility. Please consult the local authorities for
information on recycling appliances.

Customer service

In the event that your Cloer appliance becomes
defective, please contact your Cloer dealer or
Cloer customer service department.
Cloer electrical appliances comply with current
EC guidelines and safety regulations.

Conditions of warranty

Cloer grants you, the private end user, a
limited manufacturer's warranty. Assuming
careful handling and compliance with the
operating instructions and safety notices, we
will be obligated to replace the appliance at no
cost, insofar as there are defects in material or
workmanship. The repair will be effected by
repairing or replacing defective components.
Any parts replaced will become the property of
Cloer. All further claims of any type, especially
claims for indemnification, are not valid. This
warranty does not affect any rights of the
customer with respect to the sale of goods in
accordance with the applicable national laws.
The warranty period is 2 years starting from the
date on which the product was first purchased
by an end consumer. The warranty period will
not be extended or begin anew or in any other
way be affected by the subsequent sale, repair
or replacement of the product.
This warranty is passed on to you by your retail
dealer. In order to assert a warranty claim,
please contact your dealer directly.
If you have questions about your product,
please contact the Cloer importer in your
country. The address and telephone number
can be found on our website at http://cloer.
com or you can send an e-mail to
service-uk@cloer.de
As proof of warranty entitlement you must
submit the original sales receipt with the date
of sale and the dealer's address. Without the
sales receipt, the repair will be carried out at
your expense without asking.
The warranty does not cover damages resulting
from
improper use,
natural wear and tear,
external influences (e.g. damage from transport,
shocks, jolts, heat, acids, etc.),
insufficient decalcifying *
or unsuitable accessories.
The warranty will be void if the appliance
is used commercially,
is opened or modified without authorisation
or if unauthorised repairs are attempted.
Also, the warranty does not apply to consumable
materials.
* electric kettle / coffeemaker / teamaker
EN
17