GreenWorks Tools 24227 Manuel D'utilisation page 6

EN
DE ES IT FR PT NL RU FI SV NO DA PL CS SK SL HR HU RO BG EL AR TR HE LT LV ET
PROBLEM POSSIBLE CAUSE
1. Bag full
2. Blocked tube
3. Blocked impeller
Unit will not blow
4. Torn bag
or mulcher.
5. Bag unzipped
6. Battery is not secure.
7. Battery is not charged.
1. Battery is not secure.
2. Battery is not charged.
3. Power/speed switch is in
the OFF position.
4. Defective power switch.
Unit will not start.
5. Vac tubes are not correctly
installed.
6. Intake gate/cover is not
closed.
English (original instructions)
TROUBLESHOOTING
SOLUTION
1. Empty the bag.
2. Clear the blockage.
3. Clear the blockage
4. Replace the bag.
5. Zip up the bag.
6. To secure the battery pack, make sure the latches on the
top of the battery pack snap into place.
7. Charge the battery pack according to the instructions
included with your model.
1. To secure the battery pack, make sure the latches on the
top of the battery pack snap into place.
2. Charge the battery pack according to the instructions
included with your model.
3. Press the on/off switch.
4. Call toll free helpline:
5. Check vac tubes to ensure that they are allowing the switch
to be engaged when correctly installed.
6. Ensure that gate/cover is fully closed and locked.
5
.