GreenWorks Tools 24227 Manuel D'utilisation page 2

EN
DE ES IT FR PT NL RU FI SV NO DA PL CS SK SL HR HU RO BG EL AR TR HE LT LV ET
SPECIFICATIONS
Type 24227
Motor 40 Volt DC
Air Velocity 280 km/h (Max)
Weight (Battery
4 kg
Pack not included)
Battery Pack 29717/29727
Charger 29417 / 29447
Measured sound
LpA: 90dB(A) KpA:2 dB(A)
pressure level
Measured sound
LWA: 104dB(A)
power level
Vibration Ah: 3.5m/s , k:1.5m/s
DESCRIPTION
1. Variable switch
2. Low/high button
3. ON/OFF button
4. Auxiliary handle
5. Mulch/vacuum gate
6. Lock button
7. Blower tube
8. Mulcher tube
9. Bag
ASSEMBLY
UNPACKING
from the box.
breakage or damage occurred during shipping.
carefully inspected and satisfactorily operated the
product.
Greenworks Tools service centre for assistance.
The blower vac is supplied with some components not
assembled. To assemble these, proceed as follows:
ASSEMBLE AS A MULCHER
See Figure 2.
locked. (See fig 2)
Hold the gate open. (See fig 2.1)
English (original instructions)
2 2
10. 40V lithium-ion battery
11. Notched area
12. Air outlet
13. Slot
14. Tab
15. Strap
the rear clip. (See fig 2.2). Push the "hooked" end clip
of the mulcher tube into the front clip. (See fig 2.3).
Press the lock button back to engage the mulcher
tube. (See fig 2.4)
bag adaptor with the lock button. To remove the bag,
simply press lock button and remove bag. (see Fig.4).
NOTE: It may be necessary to remove the blower tube or
mulcher tubes to clear a blocked tube or impeller.
To prevent serious personal injury, make sure the
switch is in the OFF position, it is unplugged, and the
impellers have stopped before attaching or removing
tubes.
ASSEMBLE AS A BLOWER See Figure 3.
the blower housing click into the slots on the tube.
INSTALLING BAG WITH SHOULDER HARNESS See
Figure 4.
length to fit the operator's size. Pull the tab lengthen ,
pull the strap to shoten.
For complete charging instructions, refer to the
Operator's Manuals for your battery pack and
charger models.
NOTE: To avoid serious personal injury, always remove
the battery pack and keep hands clear of the variable
speed trigger when carrying or transporting the tool.
TO INSTALL BATTERY PACK
See Figure 5.
on battery pack with grooves in the blower's battery
port.
snaps in place and that battery pack is secured in the
blower before beginning operation.
1
WARNING