Publicité
Les langues disponibles
Les langues disponibles
EN
DE ES IT FR PT NL RU FI SV NO DA PL CS SK SL HR HU RO BG EL AR TR HE LT LV ET
5:00 pm, Monday through Saturday.
equipment used at any one time.
lowest possible speed to do the job.
blowing.
hoses for many lawn and garden applications,
including areas such as gutters, screens, patios,
grills, porches, and gardens.
NOTE: Please ensure that the Mulch/Vacuum Gate is
completely closed and locked.
AIR VENTS
Never cover air vents. Keep them free from obstructions
and debris. They must always remain clear for proper
motor cooling.
To avoid serious personal injury, do not wear loose
fitting clothing or articles such as scarves, strings,
chains, ties, etc., that could get drawn into the air
vents. To make sure long hair does not get drawn into
the air vents, tie back long hair.
OPERATING AS A BLOWER
Hold the blower firmly. Sweep from side to side with the
nozzle several inches above the ground or floor. Slowly
advance the unit, keeping the accumulated pile of debris
in front of you. Most dry blowing operations are better
suited to low speeds, rather than high. High speed
blowing is a better way to move heavier items like large
debris or gravel.
OPERATING AS A MULCHER
Hold the vac firmly, tilting the mulcher tubes (2-4 in. or
5-10 cm), and use a sweeping action to collect light
debris. The debris will flow into the bag. Items such as
small leaves and twigs will be mulched as they pass
through the fan housing. For longer bag life and
increased performance, empty the bag often.
CLEANING THE COLLECTION BAG
deterioration and obstruction of the air flow which will
English (original instructions)
WARNING
reduce the performance of the unit.
protection on, turn the dust bag inside out after initial
emptying and vigorously shake out the dust and
debris.
CLEARING A BLOCKED TUBE /IMPELLER
To avoid serious personal injury, be sure the unit is
OFF and unplugged before clearing the impeller..
To avoid serious personal injury, always wear gloves
to protect yourself from the impeller blades or other
sharp objects.
1. Press the on/off (
come to a complete stop.
2. Remove the battery pack.
3. Remove the blower tube or mulcher tubes and the
bag.
4. Carefully remove material blocking the tube or
impeller. Inspect the blades to ensure no damage
has occurred. Rotate the impeller blades by hand to
ensure the blockage is completely cleared.
5. Reinstall the blower tube or mulcher tubes and the
bag.
6. Insert the battery pack into the unit.
3
WARNING
WARNING
) button and wait for the unit to
Publicité
