Publicité
Les langues disponibles
Les langues disponibles
Bedinungsanl_UnitoolMulti_neu
7. Drillings for Minifix 15 connector with a drilling distance of 24 mm
For this work step you need the following tools that are not included in this packing unit:
7.1. Slide the Minifix drill guide 15/24 mm into the jig body (fig.14).
7.2. Continue with the next steps as described in points 5.2 to 5.6
8. Drillings for Minifix 15 connector with a drilling distance of 34 mm
For this work step you need the following tools that are not included in this packing unit:
8.1. Slide the Minifix drill guide 15/34 mm into the jig body (fig.14).
8.2. Continue with the next steps as described in points 5.2 to 5.6
9. Drillings for the Rafix SE, Pushfix, Onefix, Slimfix connectors
For this work step you need the following tools that are not included in this packing unit:
9.1. Slide the Rafix-Pushfix-Onefix-Slimfix drill guide into the jig body (fig.18).
9.2. Secure the drill guide by screwing one of the vertical drill guides onto the jig body (fig.19).
9.3. Slide the jig onto the work piece as far as the edge of the work piece (fig.20).
9.4. Secure the jig by tightening the clamping screw that is attached to the jig body.
9.5. Now drill the vertical hole with the appropriately adjusted stop ring (fig.20).
2005-09-26 530 rL
23.05.2006
15:03 Uhr
Minifix drill guide 15/24 mm (Cat. No. 001.25.022)
HW multi-spur drill bit* ø 15 mm (Cat. No. 001.06.615)
HS twist drill bit ø 8 mm (Cat. No. 001.20.508)
Stop ring for multi-spur drill bit ø 15 mm * (Cat. No. 001.42.693)
Stop ring for twist drill bit ø 8 mm (Cat. No. 001.42.683)
Minifix drill guide 15/34 mm (Cat. No. 001.25.023)
HW multi-spur drill bit* ø 15 mm (Cat. No. 001.06.615)
HS twist drill bit ø 8 mm (Cat. No. 001.20.508)
Stop ring for multi-spur drill bit ø 15 mm* (Cat. No. 001.42.693)
Stop ring for twist drill bit ø 8 mm (Cat. No. 001.42.683)
Rafix-Pushfix-Onefix-Slimfix drill guide (Cat. No. 001.25.024)
HW multi-spur drill bit* ø 20 mm (Cat. No. 001.06.620)
Twist drill bit ø 10 mm (Cat. No. 001.20.510) only for Rafix SE 32
Stop ring (Cat. No. 001.42.693)
Fig.18
- 5 -
- 12 -
Seite 12
Fig.19
Fig.20
Publicité
