Broan BW5830SS Manuel D'installation, D'entretien Et D'utilisation page 7

9. DUCT CONNECTION ( )
CONTINUED
N - :
ON DUCTED INSTALLATION
Plug hood power cord into the outlet.
Measure the length of 6" round flexible duct (included in the non-duct kit) required from
the top of the hood to the ceiling. Slide the 6" round flexible metal duct over the adapter
(whitout damper flaps) on the hood; attach with one included tie-wrap. Use metal foil duct
tape to seal the joint.
HJ0158
F R O N
T
Using 4 ST4 x 8 provided screws, assemble the 6" round adapter to the plenum.
HA0138
F R O N
T
Attach the aluminum flexible duct to the non-duct plenum collar. Make sure non-duct plenum "FRONT" is
facing front of hood. Secure with tie wrap and seal with metal foil duct tape.
HJ0160
7