Duct Connection - Broan BW5830SS Manuel D'installation, D'entretien Et D'utilisation

9. DUCT CONNECTION

V
ERTICALLY DUCTED INSTALLATION
Plug hood power cord into the outlet. Slide a 6" round metal duct section over the
adapter/damper on the hood. Use metal foil duct tape to seal the joint.
H
ORIZONTALLY DUCTED INSTALLATION
Plug hood power cord into the outlet. Measure and install 6" round metal ductwork to wall
cap and 90° elbow over duct collar over the adapter/damper on the hood. Use metal foil
duct tape to seal the joints.
NOTE: To make sure there will be adequate clearance between top of hood and lower
flue mounting bracket for ductwork, elbow must be located below the lower flue
mounting bracket.
:
:
HD1033A
6
HJ0157
HJ0159
L
OWER FLUE
MOUNTING BRACKET
14¼"
MAX.