B E F O R E O P E R A T I N G
• Before operating your new microwave oven make
sure you read and understand this operation
manual completely.
• Before the oven can be used, follow these
procedures:
1. Plug in the oven. Close the door. The oven display
will show
WELCOME PRESS CLEAR
.
CLOCK
2. Touch the STOP/CLEAR pad.
will appear.
:
3. Touch CLOCK and follow directions to set.
TO SET THE CLOCK
• Suppose you want to enter the correct time of day
12:30 (A.M. or P.M.).
P R O C E D U R E
1
CLOCK
Touch CLOCK pad.
1 2 3 0
2
Enter the correct time of
day by touching the numbers in sequence.
M A N U A L M I C R O W A V E O P E R A T I O N
TURNTABLE ON/OFF
For most cooking, the turntable should be on; however
the turntable can be turned off so that it does not rotate
when extra large dishes, such as the popular 13"x9"x2"
glass utility casserole, are used. The casserole should
be placed on the turntable so that it is level.
• Suppose you want to cook lasagna in a 13"x9"x2"
casserole for 45 minutes on 40% power.
P R O C E D U R E
TURNTABLE
1
ON / OFF
Touch TURNTABLE ON/OFF pad and note
TURNTABLE OFF in the display.
4 5 0 0
2
Enter cooking time.
POWER
3
4
LEVEL
Enter power level.
START
4
TOUCH ON
Touch START/TOUCH ON pad.
AND
PRESS
D I S P L A Y
ENTER
TURNTABLE ON
TIME
TURNTABLE ON
12:30000
TURNTABLE ON
D I S P L A Y
ENTER
TURNTABLE
ON
OFF
45.00000
TURNTABLE
ON
OFF
P-40000
TURNTABLE
ON
OFF
45.00000
TURNTABLE
ON
OFF COOK
3
CLOCK
Touch CLOCK pad.
This is a 12 hour clock. If you attempt to enter an
incorrect clock time,
Touch the STOP/CLEAR pad and re-enter the time.
• If the electrical power supply to your microwave
oven should be interrupted, the display will intermit-
tently show
WELCOME PRESS CLEAR AND PRESS CLOCK
after the power is reinstated. If this occurs during
cooking, the program will be erased. The time of day
will also be erased. Simply touch STOP/CLEAR pad
and reset the clock for the correct time of day.
NOTE: Your oven can be programmed with the door
open except for START/TOUCH ON, MORE TIME,
SENSOR REHEAT and POPCORN.
STOP/CLEAR
Touch the STOP/CLEAR pad to:
1. Erase if you make a mistake during programming.
2. Cancel timer.
3. Stop the oven temporarily during cooking.
4. Return the time of day to the display.
5. Cancel a program during cooking, touch twice.
NOTE:
The door can be opened for checking food and the
turntable will stay in the off position. After checking,
close door and touch START/TOUCH ON.
The turntable will stay off for one minute after door is
opened when time-of-day appears in the display. It is
possible to reprogram the oven during that minute
without touching the TURNTABLE ON/OFF pad. The
display always indicates whether the turntable is off
or on.
THE TURNTABLE SHOULD ALWAYS BE ON WHEN
USING THE SPECIAL FEATURES. On/Off function
can be used with manual cooking modes and Sensor
Reheat. Turntable off condition will automatically change
to on condition when you select auto cooking except
Sensor Reheat and AutoBake.
When cooking large quantities of food which cannot
be stirred, it is best to use a lower power level such
as 40 or 50%. You may speed cooking of large
amounts by programming 5 to 10 minutes on 100%
power (HIGH) followed by the desired time on lower
power. See page 24 for how to program multiple
sequences. You may wish to reverse a large casserole
once during cooking; simply open door, reposition
casserole, close door and touch START/TOUCH ON.
11
12:30000
TURNTABLE ON
will appear in the display.
ERROR