Samsung SESG RB34T Série Manuel D'utilisation page 55

A
A
B
A
Untitled-6 55
33. Reconnect the wire connector (A).
- This step may not apply to some
Make sure the wire connectors are
connected properly. Otherwise, the display
does not operate.
34. Place the wire and the wire connector
(A) on the holder underneath the top
cover.
- This step may not apply to some
35. Attach the provided top-left hinge cover
(A) to the top hinge and assemble the
top cover (B).
- Place the wires and connectors into
36. With the fridge door closed, put the top
cover (A) back and fasten it with the
screws using a Phillips screwdriver.
Be careful not to damage the wires when
fastening the top cover (A).
A
models.
CAUTION
models.
the top-left hinge cover (A) and top
cover (B). (Some models does not
have wires on the fridge door and
this may not apply to those models.)
CAUTION
English 55
2020-08-07 PM 12:24:55