SOLIS X-CHANGE MIXER 8351 Mode D'emploi page 63

QUITTING SHREDDING AND DISMANTLING SHREDDING CUP
• Once shredding is completed, release the ON button and pull the power plug.
• Turn the motor unit anti-clockwise and remove the motor unit of the blender
from the cover.
• Softly turn the outer cover (11) anti-clockwise and lift it off. Then, remove the
inner cover (12) from the cup.
• Remove the shredded foods from the cup. Please take care not to cut yourself
on the sharp shredding blade.
• Only now remove the blade from the cup. Hold the blade by the plastic shaft.
• Clean the blade and the cup and covers as described below.
▲
M A I N T E N A N C E A N D C L E A N I N G
O F T H E B L E N D E R A N D T H E
S H R E D D I N G C U P
• Immediately clean the appliance, the blender shaft
with blender stand and the attachments after every
use to keep the drive shaft from getting covered and
stuck with food scraps.
• Before cleaning, ensure that the plug is pulled and the
attachments are removed. Take care so as not to
hurt yourself with the sharp blades.
• Wipe the motor unit and the outer cover of the
shredding cup (11) clean with a moist, soft cloth. Let
everything dry completely. Remove potential food scraps on the power cord. Cau-
tion: Never hold or submerge the motor unit with power cord, power plug and
the outer cover of the shredding cup (11) in water.
• Clean the attachments and the shredding blade with warm dish water, prefer-
ably with a brush, and dry them off. If you have blended especially salty foods,
clean the attachments / shredding blade immediately after use, as the salt
might corrode the blades. Caution – remember: The blades are very sharp, don't
hurt yourself.
• Clean the blender shaft, the blending jar and the shredding cup with inner cover
(12) with warm water with a mild detergent and a cloth or sponge. Dry every-
thing thoroughly.
63