SOLIS X-CHANGE MIXER 8351 Mode D'emploi page 59

▲
A C T I VAT I N G T H E B L E N D E R
• You have already fastened the attachment to the shaft in the blender stand.
• Now, insert the motor unit into the blender shaft. Turn the blender shaft clock-
wise until it comes to a stop, so that shaft and motor unit are firmly connected.
The small arrow on the motor unit will turn from its first position over the sym-
bol „open lock" to the symbol „closed lock".
• Only now you should plug the power plug of the fully unrolled power cord into
a suitable power outlet.
• Insert the blender shaft vertically into the blending jar. Only the blender shaft,
not so the motor unit, must dip into the liquid or food to be blended!
• Avoid holding the blender shaft at a slant.
• Use the speed control to select the appropriate speed and press the ON button.
The appliance will start blending.
• Begin blending or chopping by executing slow up and down movements and
slightly turning the blender to both sides.
• Release the ON button before pulling the blender from the mixture, otherwise
foods might spill out of the blending jar.
59 59