Operating Elements And Connections; Safety Notes; Applications - Stage Line electronic WASH-40LED/SW Mode D'emploi

All operating elements and connections de -
GB
scribed can be found on the fold-out page 3.
1 Operating Elements
and Connections
1 Operating buttons
MODE / ESC to select a menu item
and to set values or menu options
ENTER to call up a menu item and to save a
modification
2 Display
3 Mains jack for connection to a socket (230 V~/
50 Hz) via the mains cable provided
4 Support for the mains fuse
Always replace a blown fuse by one of the same
type.
5 DMX signal input (3-pole XLR) for connecting a
light controller;
Pin 1 = ground, 2 = DMX-, 3 = DMX+
6 DMX signal output (3-pole XLR) for connection
to the DMX input of another DMX light effect
unit;
Pin 1 = ground, 2 = DMX-, 3 = DMX+
7 Ring bolt for fastening a safety rope
8 Fastening screws (hexagon socket screws) for
the mounting bracket
9 Mounting bracket
10 Microphone for music control
2

Safety Notes

The unit corresponds to all relevant directives of
the EU and is therefore marked with
WARNING The unit uses dangerous mains volt-
age. Leave servicing to skilled per-
sonnel and do not insert anything
into the air vents; inexpert handling
may result in electric shock.
Please observe the following items in any case:
G
The unit is suitable for indoor use only. Protect it
against dripping water and splash water, high air
humidity and heat (admissible ambient tempera-
ture range: 0 – 40 °C).
10
G
Do not place any vessel with liquid on the unit,
e. g. a drinking glass.
G
The heat generated inside the unit must be dissi-
pated by air circulation; never cover the air vents
of the housing.
G
Do not operate the unit or immediately discon-
nect the mains plug from the socket
1. if the unit or the mains cable is visibly dam-
aged,
2. if a defect might have occurred after the unit
was dropped or suffered a similar accident,
3. if malfunctions occur.
In any case the unit must be repaired by skilled
personnel.
G
Never pull the mains cable to disconnect the
mains plug from the socket, always seize the
plug.
G
For cleaning only use a dry, soft cloth; never use
water or chemicals.
G
No guarantee claims for the unit and no liability
for any resulting personal damage or material
damage will be accepted if the unit is used for
other purposes than originally intended, if it is not
safely installed or not correctly connected or
operated, or if it is not repaired in an expert way.
3

Applications

This LED spotlight is used for effect illumination,
e. g. on stage, in discotheques and function rooms.
It features a movable head which can be panned by
540° and tilted by 180°. 7 extra-bright 10 W RGBW
.
LEDs are used as a light source. The LEDs are
able to radiate coloured light in the three primary
colours (red, green and blue) as well as white and
light created by additive mixing. In addition, cross-
fading between colours and stroboscope effects
are supported.
The spotlight is designed for control via a DMX
light controller (8 or 13 DMX control channels), but
it can also be operated independently or together
with multiple WASH-40LEDs (master / slave mode).
In addition, the integrated microphone provides
effects that are in sync with the music.
If the unit is to be put out of operation
definitively, take it to a local recycling plant
for a disposal which is not harmful to the
environment.