Operating Elements And Connections; Safety Notes; Special Notes For Laser Units - Stage Line electronic CRAB-12B Mode D'emploi

All operating elements and connections
described can be found on the fold-out
page 3.
1 Operating Elements
and Connections
1 Microphone for music control
2 Laser beam outlet
3 Base and mounting bracket
4 Fixing hole for wall or ceiling mounting
5 Control "Motor Controller" for the rotat-
ing speed of the laser dots or figures
6 Button to activate and deactivate the
music control via the microphone (1)
7 Fan
8 Sliding switch to activate and deactivate
the laser unit and the flash feature
9 Control "Stroboflash Controller" for the
flash frequency
10 Connection DC 5 V for the power supply
unit provided

2 Safety Notes

The units (laser unit and power supply unit)
correspond to all relevant directions of the
EU and are therefore marked with

2.1 Special notes for laser units

The unit is a class 2M laser product. The
lasers have the following power and wave-
length:
CRAB-12RG
CRAB-22RG
green laser
red laser
CRAB-12B
blue laser 300 mW
WARNING 1. Do not stare into the beam!
However, a short-time ex -
posure (0.25 s max.) of
emitting laser radiation is
not hazardous to the eye.
2. The laser beams must not directly be
viewed with optical instruments (e. g.
magnifying lens or telescope). The
retina may permanently be damaged.
3. Never direct the laser beam to the eyes
of persons or animals. Caution when
aligning the unit to a reflecting surface!
Ensure that the laser beam does not hit
the eye by reflection.
4. Do not open or modify the unit. A modi-
fication can result in a more hazardous
laser radiation to be emitted (higher
laser class).
5. Keep the unit out of childrenʼs reach.
.
Power Wavelength
30 mW 532 nm
30 mW 660 nm
Power Wavelength
445 nm
GB
7