Product Presentation; Reminders And Recommendations; Mounting Kit - CDVI STAR1M Manuel D'installation

Masquer les pouces Voir aussi pour STAR1M:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

INSTALLATION MANUAL
STAR1M - Mullion Mifare
Thank you for buying our products and for the confidence you placed in our company

1] PRODUCT PRESENTATION

- 2-in-1 Mifare Reader :
- Standalone Access control system
- Wiegand Mifare
®
- Resin-coated electronics
- Audible and visual feedback
- 3 meter cable (10 wire cable - AWG28)
- Up to 150 cards (shadow mode)
- Up to 300 cards (standard mode)
- 1 Relay output (1A 12V dc)
- 1 Request to exit input
Dimensions (L x W x D): 130 x 41 x 28 mm
Technology : 13.56 MHz
Protocol : Mifare
classic, ultralight C
®
Input voltage : 12Vdc
Consumption : 120 mA
Wiegand 26/30/44 bits (Mifare
IP54
Frequency band : 13,553 - 13,567 MHz
Maximum power emitted : 42 dBμA/m

2] REMINDERS AND RECOMMENDATIONS

Installation recommendations
To protect the device from back-emf,
do not forget to install the varistor
across the lock terminals, in parallel.
Recommended cable
10 wire cable (AWG28)
Recommended power supplies
ADC335 and BS60 (in case the reader
is powered neither by the controller nor
by the reader controller [INTBUSW]).
The power supply must be designed to
be a limited power supply as defined in
EN 60950-1.
Environment
When in a humid area or close to the

3] MOUNTING KIT

Leaktight
seal
STAR1M
1
We, CDVI, declare that the STAR1M complies with the european directive 2014/53/UE.
The whole UE declaration is avaiblable that the web site www.cdvi.com.
card reader
®
reader mode
reader)
®
-25°C à +70°C
IK09
sea, we recommend applying varnish to
the terminals to avoid oxidation.
This product is shipped with a
varistor.
The varistor must be connected directly
to the locking system terminals (electric
strikes, electromagnet, or lock) operated
by the device. If the device functions
with several locking systems, each one
must be fitted with a varistor. The varis-
tor limits overload produced by the strike
coil, known as self-effect or back-emf. If
you are using a "Shear Lock", electro-
magnet or other type of electric lock, we
recommend the use of dedicated power
supply for the lock.
TF 3x30
S5
Screws
Plastic anchor
Screwdriver tip
2
2
TORX
TORX
3x8
®
®
Screws
1
1
EN
STAR1M
For optimum
lighting, be
careful to not
fold the cable
inside the
product.
Varistor
METALR tag
1
1
cdvigroup.com
30
11

Publicité

Table des Matières
loading

Table des Matières