CDVI STAR1M Manuel D'installation page 15

INSTALLATION MANUAL
STAR1M - Mullion Mifare
7.1 Shadow mode
In Shadow mode, two different badges are programmed for the same user. The user
gets one of the two badges and the second badge is stored in secure place by the su-
pervisor as a shadow badge. These 2 badges can both grant access. In case the user
badge is lost or stolen, the shadow badge can be used to delete the user from the
STAR1M.
Dipswitch setting
Add user cards (max. 150) :
Enter in programming
Yellow led
Present the master badge
Delete user cards :
Enter in programming mode
Present the master badge
card reader
®
Present user card
Beep + green LED then yellow LED
To add more cards, repeat step user card
and step shadow card.
Yellow LED
Present the user card or its shadow card
Beep + LED OFF then back to yellow LED
Present again the same card
Beep + red LED then back to yellow LED
Both cards are deleted
If the card is not programmed, it will then.
ON
ON ON ON ON
OFF
1 2 3 4
Swipe the master badge or
wait 10 seconds
Exit from programming
Present the shadow card
2 beeps + green LED flashing
Swipe the master badge or
wait 10 seconds
Exit from programming
mode
EN
mode
Blue LED
Blue LED
15
cdvigroup.com