Standard Mode - CDVI STAR1M Manuel D'installation

INSTALLATION MANUAL
STAR1M - Mullion Mifare

7.2 Standard mode

In Standard Mode only one user badge is programmed for each user. To delete a user
from the STAR1M, enter the programming mode and present the user badge.
Dipswitch setting
Add user cards (max. 300) :
Enter in programming mode
Present the master badge
Delete user cards :
Enter in programming
Present the master badge
16
cdvigroup.com
card reader
®
Yellow LED
Present the user card one after the other
Beep + green LED then yellow LED
If the card is already programmed
Beep + LED OFF then back to yellow LED
mode
Yellow LED
Present the user card
Beep + LED OFF then back to yellow LED
Present again the same card
Beep + red LED then back to yellow LED.
If the card is not programmed it will then
ON
ON ON ON ON
OFF
1 2 3 4
Swipe the master badge or
wait 10 seconds
Exit from programming
mode
Swipe the master card or
wait 10 seconds
Exit from programming
mode
EN
Blue LED
Blue LED