Breville Hemisphere Control Instructions page 3

on the blender jug before
operating.
• None of the recipes in
this instruction book are
considered a heavy load.
• Do not leave the Breville
Hemisphere™ Control
Blender unattended when
in use.
• Always ensure the Breville
Hemisphere™ Control
Blender is turned off by
pressing the ON | OFF
button on the control
panel. Then unplug
the cord. Make sure the
motor and blades have
completely stopped before
attempting to move the
appliance, or when the
Breville Hemisphere™
Control Blender is
not in use and before
disassembling, cleaning
and storing.
• If food becomes lodged
around the blending
blade, turn the Breville
Hemisphere™ Control
Blender off by pressing
the ON | OFF button on
the control panel. Then
unplug the cord. Make sure
the motor and blades have
completely stopped before
removing the jug from the
motor base. Use a spatula
to dislodge or stir the food
before continuing. Do not
use fingers as the blades
are sharp.
• Keep hands, fingers, hair,
and clothing as well as
spatulas and other utensils
away from the blender jug
during operation.
• Never place your fingers,
hands or utensils inside
the blender jug without
unplugging the appliance
from the power outlet.
• Be careful when handling
the blending blade
assembly as the blades are
very sharp. Be careful when
emptying the blender
jug and during cleaning.
Mishandling of the blades
may cause injury.
• Do not remove the blender
jug from the motor base
while in operation.
3