Breville Hemisphere Control Instructions page 12

FUNCTION PROGRAMMED TIME
Blend 60 seconds
Smoothie 60 seconds
Ice Crush 60 seconds
When '00' seconds is reached, the blender will
automatically cease to operate and the function
button and CANCEL button illumination will
go out. The ON | OFF button will illuminate
and flash.
To stop blending at any time, press the
CANCEL button or the selected function
button.
The ON | OFF button can also be pressed,
but this will also turn the appliance off and all
illuminations will go out.
The maximum amount of ice cubes the blender
can blend at any one time is 1 standard ice tray
or 250g.
WARNING
Never place anything other than food and
liquids in the blender while the motor is
running.
NOTE
The smoothie function has a unique
processing technique that blends the denser
ingredients at a lower speed, then increases as
ingredients thicken. This may happen several
times while blending smoothies.
Step 9
For ingredients that require short bursts of
power, select the PULSE function. The PULSE
button will illuminate and remain illuminated
while the button is depressed. When this
function is selected, the LCD timer screen
will illuminate and count upwards in one
second increments during pulsing. Press the
PULSE button in short bursts until blending is
complete.
NOTE
Use the PULSE button when the
food that is being processed is too thick or
coarse to circulate within the blender jug.
12
Step 10
At the end of use, always ensure the blender
is turned off by pressing the ON | OFF button
on the control panel. Then unplug the cord.
Ensure the motor and blades have completely
stopped before attempting to move the
appliance, or when the Breville Hemisphere™
Control Blender is not in use and before
disassembling, cleaning and storing.
NOTE
• During the blending process, ingredients
may stick to the sides of the blender jug.
To push the food back onto the blades, press
the ON | OFF button on the control panel to
turn blender off and remove the power cord.
Remove the lid and use a plastic spatula to
scrape down the sides of the jug. Replace the
lid before recommencing blending.
• If any moisture or liquid appears on top of
the motor base during blending, press the
ON | OFF button on the control panel, and
remove the power plug. Remove the blender
jug. Wipe the motor base immediately with a
dry cloth or paper towel to absorb the liquid.
Check the blender jug is correctly assembled.
• Never place anything other than food and
liquids in the blender while the motor is
running.