PRO-POINT Air Shear Mode D'emploi page 3

V 2.0
Air Shear
SPECIFICATIONS
Air consumption
Max. cutting capacity
No load speed
Max. air pressure
Air inlet
INTRODUCTION
The Straight Grip Air Shear shears plastic, tin, aluminum, steel and other metals and with its heavy duty carbon steel
cutting blades and lets you cut up to 16 gauge steel. It is ideal for body shops, machine shops, and heating and air
conditioning contractors.
IMPORTANT SAFETY PRECAUTIONS
WARNING! Read and understand all instructions before using this tool. Keep this manual for the safety warnings
and precautions, operating, inspection and maintenance instructions. When using this tool, basic precautions
should always be followed to reduce the risk of personal injury and/or damage to the equipment. Note that when
this manual refers to a part number, it refers to the parts list included. Before allowing someone else to use this tool,
make sure they are aware of all safety information.
WORK AREA
1. Keep your work area clean and well lit. Cluttered and dark areas invite accidents.
2. Operate in a safe work environment. Do not use machines or air tools in damp or wet locations. Do not expose
to rain. Do not use power tools in the presence of flammable gases or liquids.
3. Keep children, bystanders and visitors away from the work area. Do not let them handle tools or extension
cords. No one should be in the work area if they are not wearing suitable protective equipment.
4. Store unused equipment. When not in use, tools must be stored in a dry location to prevent rust. Always lock up
tools and keep them out of reach of children.
For technical questions call: 1-800-665-8685
4 CFM @ 90 PSI
16 gauge
2,500 SPM
120 PSI
1/4" NPT
8380198
3