Blade Replacement - PRO-POINT Air Shear Mode D'emploi

8380198

BLADE REPLACEMENT

To replace the Blades use only recommended replacement Blades (55, 54, 56) for this Shear. (See Figure B)
• Remove the two Screws (52) and Cutter Housing Nuts (51) from the Cutter Housing (50) of the Shear (See
Figure B)
• Remove the Center Blade (54) first then remove the Left Blade (55) Right Blade (56) and the two spacers (53).
(See Figure B.)
• Install the new Blades. Place the two spacers (53) between the new Left Blade (55) and Right Blade (56) and
insert into the Cutter Housing (50) (Figure B)
• Thread in the two screws (52) and tighten the two Cutter Housing Nuts (51) (See Figure B.)
50
52
Figure B
Cutter Housing (50)
Screw (52)
Right Blade (56)
Spacers (53)
Center Blade (54)
Left Blade (55)
Screw (52)
Cutter Housing Nuts (51)
Cutter Housing (50)
10
AIr Shear
54
For technical questions call: 1-800-665-8685
51
56
53
55
52
V 2.0
50