Using The Remote Control; Cleaning Mode; Additional Function; Inserting Batteries - Samsung SR20H9050U Mode D'emploi

Using the remote control

1 Power/Recharging
Power
Recharging

2 Cleaning mode

Auto clean
Spot clean
Max clean
Manual clean
Start/Stop

3 Additional function

Silence mode
Dust sensor
mode
Sound

Inserting batteries

Open the battery cover by lifting it up
while pressing the locking tab and
insert the batteries as shown in the
illustration. Then, close the cover until
it clicks into place.
[A Type] [B Type]
ENGLISH-16
Turn the vacuum cleaning robot's power on/off
Select to recharge the vacuum cleaning robot at the
charger while it is in cleaning process
Select to automatically clean the entire space once
Select to clean a localized area intensely
Select to make the vacuum cleaning robot to clean
until battery indicator flashes after reaching down to
one level
Select to manually control and clean by using the
remote control
Select to start or stop cleaning process
Select to clean with lower operation noise
✻ Turbo mode is not available
In Auto clean mode
▶When dust intake is detected, suction of the
vacuum cleaning robot will become stronger and it
will move around that area to focuses on cleaning
the surrounding area.
In Spot/Max/Manual clean
▶When dust intake is detected, suction of the
vacuum cleaning robot will become stronger.
Each time you press this button, Sound Effects →
Mute is selected in this sequence.
✻ Remote control function NOT supported.