Using The Remote Control; Cleaning Modes; Additional Functions - Samsung POWERbot SR2AH905 Série Manuel D'utilisation

Using the remote control

1 power/recharging
Power
Recharging

2 Cleaning modes

Auto clean
Spot clean
Max clean
Manual clean
Start/Stop

3 additional functions

✻ ✻ Available only with a remote control
turbo mode
Dust sensor mode
Sound
inserting batteries
Open the battery cover by lifting it up
while pressing the locking tab, and
then insert the batteries as shown in
the illustration. Then, close the cover
until it clicks into place.
Turn POWERbot's power on/off.
Select to recharge POWERbot at the docking station while it
is cleaning.
Select to automatically clean until the battery is depleted.
Select to clean a localized area intensely.
Select to make POWERbot clean space dividing until
the battery indicator flashes and the battery is almost
discharged.
Select to manually control and clean by using the remote
control.
Select to start or stop cleaning.
Select to clean with high suction power.
In Auto clean mode
fWhen dust is detected, POWERbot's suction will become
stronger will become stronger and it will focus on cleaning
the immediate area.
In Spot/Max/Manual clean
fWhen dust is detected, POWERbot's suction will become
stronger.
Each time you press this button, Sound Effects → Mute is
selected in this sequence.
✻ ✻ Remote control function NOT supported.
ENGLISH-15