Technical Specifications - HQ Power VDL215EQ2 Notice D'emploi

8. Technical Specifications

power supply
fuse
dimensions
total weight
max. ambient temperature
input/output connectors
input impedance
max. input level
output impedance
max. output level
frequency response
THD+ noise
IM distortion (SMPTE)
S/N ratio
channel separation
graphic EQ
type
bandwidth
Use this device with original accessories only. Velleman nv cannot be held responsible in the
event of damage or injury resulted from (incorrect) use of this device. For more info
concerning this product, please visit our website www.velleman.eu. The information in this
manual is subject to change without prior notice.
© COPYRIGHT NOTICE
This manual is copyrighted. The copyright to this manual is owned by Velleman nv. All
worldwide rights reserved. No part of this manual may be copied, reproduced, translated or reduced to
any electronic medium or otherwise without the prior written consent of the copyright holder.
25.05.2009
VDL215EQ2
230 VAC~50 Hz
slow blow 500 mA, 250 VAC (5 x 20 mm) (order code FU0.5N)
19" x 45 mm x 140 mm
2 kg
45°C
XLR or 6.35 mm (all balanced)
20k Ω balanced
+22 dBm balanced
typical < 150 Ω
+22 dBm (2k Ω); +18 dBm (600 Ω)
20 Hz to 20k Hz, ±1 dB
< 0.01 % (20 Hz – 20k Hz + 4 dBm)
< 0.005% @ +4 dBm
110 dB below max. level (A weighting)
60 dB (1k Hz)
constant Q
2 x 15, 2/3 octave ISO spacing from 25 Hz to 16k Hz
4
Rev. 01
©Velleman nv