Explanation Of General View - Makita DUC121 Manuel D'instructions

ENGLISH
(Original instructions)
1 Red indicator
2 Button
3 Battery cartridge
4 Star marking
5 Lock-off button
6 Switch trigger
7 Sprocket cover
8 Knob
9 Cutter
10 Guide bar
SPECIFICATIONS
Standard guide bar
Standard saw chain
Sprocket
Overall length
Chain speed per minute (min
Chain oil tank volume
Rated voltage
• Due to our continuing program of research and devel-
opment, the specifications herein are subject to change
without notice.
• Specifications and battery cartridge may differ from
country to country.
• Weight, with battery cartridge, according to EPTA-Pro-
cedure 01/2003
WARNING: Use appropriate combination of the guide
bar and saw chain. Otherwise personal injury may result.
Intended use
The tool is intended for cutting branches / pruning trees.
It is also suitable for tree service.
General Power Tool Safety Warnings
WARNING Read all safety warnings and all
instructions. Failure to follow the warnings and
instructions may result in electric shock, fire and/or
serious injury.
Save all warnings and instructions for future reference.

Explanation of general view

11 Arrow
12 Spring
13 Sprocket
14 Hook
15 Hole
16 Oil tank cap
17 Oil inspection window
18 Oil tank opening
19 Tip guide
20 Lower guide
Model
Guide bar length
Cutting length
Type
Type
Pitch
Gauge
No. of drive links
Number of teeth
Pitch
Net weight
–1
)
DUC121
2.5 kg
4.8 m/s (290 m/min)
D.C. 14.4 V
Cordless Chain saw safety warnings:
1. Keep all parts of the body away from the saw
chain when the chain saw is operating. Before
you start the chain saw, make sure the saw chain
is not contacting anything. A moment of inatten-
tion while operating chain saws may cause entan-
glement of your clothing or body with the saw chain.
2. When holding with both hands, always hold the
ENE090-1
chain saw with your right hand on the rear han-
dle and your left hand on the front handle. Hold-
ing the chain saw with a reversed hand configuration
increases the risk of personal injury and should
GEA010-1
never be done.
3. Hold the power tool by insulated gripping sur-
faces only, because the saw chain may contact
hidden wiring. Saw chains contacting a "live" wire
may make exposed metal parts of the power tool
"live" and could give the operator an electric shock.
4. Wear safety glasses and hearing protection. Fur-
ther protective equipment for head, hands, legs
and feet is recommended. Adequate protective
clothing will reduce personal injury by flying debris
or accidental contact with the saw chain.
21 Scabbard (chain cover)
22 Push nut
23 Slotted bit screwdriver
24 Filter
25 Locking ring
26 Washer
27 Limit mark
28 Brush holder cap
29 Screwdriver
DUC122
115 mm
11.5 cm
Carving bar
25 AP
6.35 mm (1/4")
1.3 mm (0.05")
42
9
6.35 mm (1/4")
422 mm
2.6 kg
5.0 m/s (300 m/min)
3
80 cm
D.C. 18 V
GEB119-1
15