Usb - SOUNDMASTER IR3500 Mode D'emploi

Connect a USB mass storage to this unit to enjoy the device's stored music through the
powerful speakers of this unit.
USB playing
1. Insert the USB device into the USB port at the rear side of the unit.
2. Press the " " button repeatedly on the unit or press the "SOURCE" button on the remote
control until " USB " is displayed to select the USB function.
3. The playback will start automatically.
Resume function
You can pause and resume playback from the point where playback stopped (RESUME) by
pressing the " " button and turning off the power or switching functions. If you press the "
button and then the "
Skip search and search
• Press the " " button once or more to skip backward one or more tracks.
• Press the " " button once or more to skip forward one or more tracks.
• Press and hold the "
position that you want to start playing from and press
• Press and hold the "
position that you want to start playing from.
Intro function
Press the "INTRO" button on the remote control to start play the beginning of each track
consecutively from first song. The playing time of each track is 10 seconds. When you hear the
desired track, press the "
Program mode
1. When playing music, press the "
2. Then press the "PROGRAM" button, then the information "P01 T01" will be displayed on the
screen.
3. Choose the desired track with the buttons "
4. Press the "PROGRAM" button to confirm the selected track and go to the next program
setting.
5. After finished setting, press the "
6. In program playback, the numbers on the remote control are invalid. You can only press the
" buttons to change the tracks.
"
/
7. Change the source or press the "
Note: You can store up to 20 tracks!
For devices with a USB cable
1. Insert the plug of the USB cable (not supplied) into the
USB socket at the rear side of the unit.
2. Insert the other plug of the USB cable into the output
terminal of the USB device.
USB charging (5V
You can plug an USB cable in the USB socket to charge the mobile device.
Note:
If the USB device is corrupted, this unit will not be able to detect and play the music stored.
Format the USB mass storage device and restore the music on the device with a computer.
" button again, playback starts again from the beginning (track 1).
" button on the remote control to search backward for the track
" button on the remote control to search forward for the track
" button twice.
" button on the remote control.
" button to finalize and start the programmed playback.
" button twice to clear the program setting.
1A socket only)

USB

to continue the playback.
" or " " to store as P01, P02 etc.
12
IR3500 / English Instruction Manual
"