Take Care - Saey 200 HOUT Mode D'emploi

3.4 Saey 200 + cucina
The discharge of fumes takes place at the
back of the stove.
4. SUITABLE FUELS
The SAEY 200 + stove makes use of the following fuels :
* WOOD : Logs with sticky bark, e.g. cleaved logs with a length of 1/3
metres.
The wood should be stored for about two years, and should
have a maximum residual humidity level of 20%.
Wet wood does not burn well and produces smoke, resulting
in condensation and a tar discharge, which makes the stove
dirty.
Take care: DO NOT burn waste matter.

TAKE CARE :

5. FOR THE FIRST KINDLING
When used for the first time, the stove must be dried out first. For this
purpose, use a little fuel to keep the fire burning for one hour. Air slider
R + L (at the front, above the glass panel) slide to the outside (standing
open). This causes the protective lacquer to dry up, and a smell may be
given off.
Monitor the protection process carefully. In this regard, carefully wipe
off any condensation drops before the residue gets a chance to burn
into the enamel (e.g. the lacquer).
NO coals
NO synthetic fuels (e.g. FUTUREX)
DO NOT burn waste matter
25