Rotel G5300CH Mode D'emploi page 87

CAUTION: do not drink the condensate water.
o Clean the filter:
▪ Open the door.
▪ Take out the filter.
▪ Clean the filter by wiping off the scrap threads
accumulated on it.
▪ Reinstall the filter.
o Clean the base filter:
▪ Open the cover.
▪ Unscrew both locking levers towards each other.
▪ Clean the base filter completely.
▪ Re-insert the base filter.
▪ Screw both locking levers.
▪ Close the cover until it locks into position.
o Clean the heat exchanger:
▪ Allow the dryer to cool down.
▪ Unlock the maintenance cover and open it completely.
▪ Turn the two locking bars at the side of the heat exchanger
towards the middle, to the horizontal position, and pull
the heat exchanger out.
▪ Clean the heat exchanger completely and remove all lint,
drain thoroughly.
▪ Fully insert the heat exchanger back into the housing
and lock it again by turning the locking bars back to their
original position.
▪ Screw both locking levers towards each other and close
the maintenance cover.
Note: please clean the heat exchanger at least once every 3 months if
frequently used.
Gebrauchsanweisung ○ Mode d'emploi ○ Istruzioni per l'uso ○ Instructions for use
Locking
lever
87
Filter
base fil-
ter
Maintenance cover