Programme End; Special Functions; Delay Function; Anti-Crease Function - Rotel G5300CH Mode D'emploi

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Programme end

o
The drum will stop running when the programme ends, the indicator light remains on
and the buzzer will beep several times.
o
The "Filter" and "Full" LED lights will remind the user to clean the filters and to empty
the container.
o
The dryer will automatically start the【Anti-crease】function if the user doesn't re-
move the load after a short while.
o
Please press the【On/Off】key to switch off the dryer and pull out the plug.
Note: while drying, the compressor and the water pump generate some noise, which is en-
tirely normal.

• SPECIAL FUNCTIONS

Delay function

This function is used for delaying the drying programme from 0 to 24 hours. The delay time
means the programme will start after x hours. When the delay programme starts, the time
starts to decrease on the display and the delay icon blinks.
o
Steps in details:
▪ Load your laundry and make sure the machine door is closed.
▪ Press the 【On/Off】button, then to turn the programme selector knob and
select a programme.
▪ You can also select the 【Anti-Crease】or【Signal】function.
▪ Press the【Delay】key.
▪ Continue to press the 【Delay】key to select the delay time.
▪ After the 【Start/Pause】key is pushed, the dryer is in running mode. The dry-
ing procedure will be automatically started when the delay time is over.
▪ If you push the【Start/Pause】button again, the delay function will be paused.
▪ If you wish to cancel the "Delay" function, please press the 【On/Off】button.

Anti-Crease function

o
At the end of the drying cycle, this programme activates a 30 minutes'anti-crease
function (default) or a 120 minutes'one (if selected).
o
This function prevents the formation of wrinkles in the laundry when the delayed
start has been activated and when you aren't available to remove the load immedi-
ately at the end of the cycle.
o
The laundry can be removed at any time while using this function.
o
Except Cool, Refresh and Wool, all the other programmes have this function.
Gebrauchsanweisung ○ Mode d'emploi ○ Istruzioni per l'uso ○ Instructions for use
82

Publicité

Table des Matières
loading

Produits Connexes pour Rotel G5300CH

Table des Matières