• OPTIONAL PARTS
The following parts are optional and only available with some models. To install them, wear
protective gloves and follow the instructions shown below.
• INSTALLATION
o
Remove the drain hose from the hose connector using plier.
o
Insert the external drainage hose.
o
Put the hose holder in the washing basin or any other sink.
• QUICK START
Note: before first use, make sure the dryer is installed properly. Allow the dryer to stand for
2 hours after transporting and use a soft fabric to clean the inside drum.
Plug in
Gebrauchsanweisung ○ Mode d'emploi ○ Istruzioni per l'uso ○ Instructions for use
Hose holder (optional)
Condensing drain hose (optional)
Load
79
Close door