Control Panel; Using The Dryer; Programme Selector; Programme Start - Rotel G5300CH Mode D'emploi

• CONTROL PANEL

19. On/Off: the appliance is switched on or off.
20. Start/Pause: press the button to start or pause the drying cycle.
21. Indicator LED light
22. Function LED light: 3h, 6h, 9h, 12h, Child lock, Filter, Full and Anti-Crease
23. Special function: these buttons are used for setting additional functions (Delay, Anti-
Crease, Childlock).
24. Programmes: different dryer cycles can be selected according to the user's needs to
get the most effective drying result.

• USING THE DRYER

o
Check if the container has been emptied.
o
Open the door, ensure that the filter is clean and securely placed.
o
Load the machine, making sure that no piece of laundry gets between the door and
the relative seal. Close the door.

Programme selector

Press the 【On/ Off】button. When the LED display screen brightens up, rotate the
o
programme knob to select the desired programme.
o
Select the【Delay】or【Anti-Crease】function for additional option.
o
Press the【Start/Pause】key.

Programme start

o
The drum will keep rotating after the programme starts, the state light in the display
area will flash in sequence, the remaining time displayed will change automatically.
Gebrauchsanweisung ○ Mode d'emploi ○ Istruzioni per l'uso ○ Instructions for use
81